Call us toll free: 800-753-6889

Shop By

Categories

Manufacturer

New
Beckson Marine-118PF

Thirsty-Mate Hand Pump with 20 HoseThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 18 Diameter: 1-1/4 Strokes/Gal: 10 Capacity: 6GM Hose Length: 20WARNIN

$41.06

Boat Parts
Mfg Part: 118PF
Manufacturer: Beckson Marine
Condition: New


New
Whitecap-S-230WC

T-Handle Latch - Chrome Plated Zamac/White Nylon - No Lock - Freshwater Use OnlyFeatures:Nylon Body and CP Zamac handle non-locking T-Handle latchShort Offset Cam BarNylon body is whiteNeoprene O-ringShaft is 1-3/8 long Chrome Plated Zamac parts should be installed on fresh water boats only

$34.00

Boat Parts
Mfg Part: S-230WC
Manufacturer: Whitecap
Condition: New


New
Beckson Marine-124PF6

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24 Diameter: 1-3/4 Strokes/Gal: 6 Capacity: 10GPM Hose Length: 72WARNING:

$58.16

Boat Parts
Mfg Part: 124PF6
Manufacturer: Beckson Marine
Condition: New


New
Uflex USA-B502CHT/L

Boat Parts

$850.08

Boat Parts
Mfg Part: B502CHT/L
Manufacturer: Uflex USA
Condition: New


New
Polyform-EFC-2 BLUE

Boat Parts

$51.78

Boat Parts
Mfg Part: EFC-2 BLUE
Manufacturer: Polyform
Condition: New


New
Polyform-CW68482

Boat Parts

$47.29

Boat Parts
Mfg Part: CW68482
Manufacturer: Polyform
Condition: New


New
Schmitt & Ongaro Marine-10050LUCAS

Boat Parts

$47.15

Boat Parts
Mfg Part: 10050LUCAS
Manufacturer: Schmitt & Ongaro Marine
Condition: New


New
Beckson Marine-124PF

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24 Diameter: 1-3/4 Strokes/Gal: 6 Capacity: 10GM Hose Length: 24WARNING:

$45.96

Boat Parts
Mfg Part: 124PF
Manufacturer: Beckson Marine
Condition: New


New
Beckson Marine-136PF

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 36 Diameter: 1-3/4 Strokes/Gal: 4 Capacity: 13GPM Hose Length: 36WARNING:

$53.26

Boat Parts
Mfg Part: 136PF
Manufacturer: Beckson Marine
Condition: New


New
Whitecap-S-226WC

T-Handle Latch - Chrome Plated Zamac/White Nylon - Locking - Freshwater OnlyFeatures:Nylon Body and CP Zamac handle Locking T-Handle latchShort Offset Cam BarNylon body is whiteNeoprene O-ring & Key fastener includedSurface Depth - 1/8-3/4Diameter - 3Cut-Out - 2-1/2Chrome Plated Zamac parts should be installed on fresh water boats only

$42.14

Boat Parts
Mfg Part: S-226WC
Manufacturer: Whitecap
Condition: New


New
Turning Point Propellers-31501912

Boat Parts

$347.76

Boat Parts
Mfg Part: 31501912
Manufacturer: Turning Point Propellers
Condition: New


New
Beckson Marine-224PF

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24 Diameter: 1-1/2 Strokes/Gal: 7 Capacity: 8GPM Hose Length: 24WARNING: T

$43.67

Boat Parts
Mfg Part: 224PF
Manufacturer: Beckson Marine
Condition: New


New
Turning Point Propellers-CW55812

Boat Parts

$311.31

Boat Parts
Mfg Part: CW55812
Manufacturer: Turning Point Propellers
Condition: New


New
Airmar-MMC-9N2

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.

$115.50

Boat Parts
Mfg Part: MMC-9N2
Manufacturer: Airmar
Condition: New


New
Sika-607393

SikaBiresin® CR72 - Pale Amber - 1 GallonApplications:High performance marine boats, parts, and tooling applicationsSuitable for wet layup, vacuum-bagging, infusionFeatures:Epoxy lamination systemLow viscosity for excellent wet-outThree hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow)UV resistantAbove or below waterline applicationsRoHS and REACH compliantNon-styreneExcellent bond to all fabricsSuitable for aramid fiber laminatesWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$213.60

Boat Parts
Mfg Part: 607393
Manufacturer: Sika
Condition: New


   Showing 1-15 of 15 Results   

Contact Us

Phone: 800-753-6889

Address: Carrollton, TX 75006

Information

Customer Service

External Links

Copyright © TechBuys All Rights Reserved.

Visa  MasterCard  American Express  Discover